32x6 genoa cars |
Mod. 602.112
"T" TRACK 32x6 with 100 mm holes-spacing
Mod. 602.212
"T" TRACK 32x6 with 50 mm holes-spacing
High resistance silver anodized light alloy extrusion. Rounded upper edges, larger
base with a seat for the silicone. Hard black anodization is also available on request (add /B
to the model number).
Hole spacing: 100 mm or, for a more accurate positioning, 50 mm. Fasteners: 6 mm screws
Weight: 0.8 kg/m Max length: 6 m
Mod. 691.2411
END FITTING, made in plastic, or :
mod. 691.241/AL - silver anodized alu
mod. 691.241/B - black anodized alu
mod. 691.241/S - AISI 316 s. steel
Mod. 622.492
GENOA CAR 32x6
Hard black anodized aluminium slider with low-friction nylon sliding inserts. The revolving upper structure (±50°) is made of AISI 316 s.steel. The resin sheave is fitted with 2 side ball bearing, wide section for double sheet. AISI 316 s.steel pin with a lock-up position. Becket for remote control line. Weight = 0.82 kg SWL = 2800 kg
Mod. 620.492
GENOA CAR 32x6
For
32x6 “T” track, as the above model, but with smaller sizes.
Weight = 0.40 kg SWL = 1200 kg
Mod. 622.462
SIMPLE SLIDER
An
10 mm shackle is fitted on the aluminium slider. Also this model is supplied with the stop pin.
Weight = 0.45 kg = 2200 kg
For boats up to 44 ft
For boats up to 38 ft
CAR CONTROLCAR
CONTROL
2 : 1
Mod. 622.492
Mod. 909.552
Mod. 691.251
CAR
CONTROL
3 : 1
Mod. 622.492
Mod. 949.552
Mod. 691.252
Mod. 909.552 |
55 mm block connected to the car. | |
Mod. 949.552 |
55 mm block with becket connected to the car. | |
Mod. 691.251 |
Black aluminium end fitting with one 50 mm sheave (Weight 0.26 kg). | |
Mod. 691.252 |
Black aluminium end fitting with two 50 mm sheave (Weight 0.38 kg). |
MOBILE TACKLE
FOR CARS CONTROLMOBILE
TACKLE
4 : 1
Mod. E45.4
Mod. 691.711
Mod. E45.4 |
Mobile 4:1 tackle done with size 45 mm fiddle blocks with snap shackle. | |
Mod. 691.711 |
Stop pin for 32x6 T-track. |