clutch selection guide
A complete range with 5 different models is supplied in single, double and triple versions.

Line retrieval can be achieved with the lever closed, the line stops automatically in the new position with no slippage.
The line can be released under load without the use of a winch because the Antal mechanism guarantees easy opening even under heavy conditions.

Max loads of the lower table for each model and for different line diameters have been obtained from extensive tests.
Load values higher than the max load may damage the line cover, not the clutch.		   All Antal clutches, except the small CAM611, are fitted with the ingenious “V-Grip” system: a “V” shaped cam that improves the holding strength, increases the bearing surface on the line and consequently gives higher working loads without cover damages.
CLUTCH MAX LOAD (kg)
LINE
DIAMETER
mm		 CAM
611		 V-CAM 814* * - Plus* - Maxi*
10 12 14 8/10 10/12 12/14 12 14 16 14 16 18 20 22
Ø = 6 250    
Ø = 8 380 500     600
Ø = 10 500 700 700   850 850   1050
Ø = 12   1000 1000 1000   1200 1200 1400 1400   1400
Ø = 14 1300 1300 1500 1700 1700 1700 1700
Ø = 16   1600   2100 2100 2100
Ø = 18 2600 2600
Ø = 20 3000 3000
Ø = 22 3400

*These models are fitted with the V-GRIP system that is internationally patented.