STANDARD WINCHES
There are three series of standard winches:
one direct speed winches, small and fast models for boats up to 6-7 m;
two speed winches, direct and reduced: medium size models for boats up to 9-10 m;
two reduced speed winches, medium-large size models for boats up to 12-13 m, available
also with self-tailing.
SNUBBING WINCH |
 |
|
|||||||||||
Basic model, snubbing winch without handle, completely glass-fiber resin made. |
ONE DIRECT SPEED WINCHES |
 |
|
Turn the handle clockwise to engage the single direct gear; the handle turns freely counterclockwise. Model W6 is the smallest and lightest in the range, with a glass-fibre resin base and drum and an aluminium central rod. Model W7 is similar but with a hard black anodized aluminium drum. Model W8 has an AISI 316 stainless steel central rod, a bronze base and a black anodized aluminium (AL) or chrome-plated bronze (BR) drum mounted on roller bearings. |
| 1 SPEED WINCHES |
|
||
| MODEL | W6 | W7 | W8 |
| POWER P1 | 6.7* | 6.7* | 7.3 |
| RECOVERY S1 (mm) | 188 | 188 | 220 |
| WEIGHT AL (kg) | 0.40** | 0.70 | 1.50 |
| WEIGHT BR (kg) | - | - | 2.10 |
| SCREWS N x Ø (mm) | 5 x Ø6 | 5 x Ø6 | 5 x Ø6 |
* For mod. W6 and W7 winch power is calculated
with short handle (L = 200 mm). |
|||
TWO SPEED WINCHES: DIRECT, REDUCED |
 |
|
The first speed is direct (one turn of the drum for each turn of the handle); the second speed is reduced: slower but more powerful. Bronze base and gears, AISI 316 stainless steel central rod and roller bearings, and black anodized aluminium (AL) or chrome-plated bronze (BR) drums. |
| 2 SPEED WINCHES |
|
|||
| MODEL | W16 | W30 | W42 | W47 |
| POWER P1-P2 | 7.3 / 14.5 | 7.0 / 28.0 | 6.4 / 42.5 | 5.6 / 46.8 |
| RECOVERY S1-S2 (mm) | 220 / 110 | 235 / 60 | 250 / 37 | 283 / 35 |
| WEIGHT AL (kg) | 2.00 | 2.80 | 4.00 | 5.70 |
| WEIGHT BR (kg) | 2.90 | 3.80 | 6.00 | 8.00 |
| SCREWS N x Ø (mm) | 5 x Ø6 | 5 x Ø6 | 5 x Ø6 | 5 x Ø6 |
TWO REDUCED SPEED WINCH |
 |
|
Quick and powerful operation is obtainable with the first reduced speed, then with increasing load, simply wind in the opposite direction the second gear and maximum power is automatically selected. Marine bronze is used for gears, AISI 316 stainless steel for central rod and roller bearings, CNC aluminium base, hard black anodized aluminium (AL) or chrome-plated bronze (BR) for the drum. |
| 2 SPEED WINCHES |
 |
|||
| MODEL | W44 | W48 | W52 | W60 |
| POWER P1-P2 | 20.0 / 43.0 | 25.0 / 46.3 | 14.9 / 51.1 | 18.7 / 61.2 |
| RECOVERY S1-S2 (mm) | 81 / 38 | 65 / 36 | 107 / 31 | 85 / 26 |
| WEIGHT AL (kg) | 5.50 | 6.30 | 7.80 | 9.50 |
| WEIGHT BR (kg) | 8.50 | 9.50 | 11.50 | 12.60 |
| SCREWS N x Ø (mm) | 6 x Ø8 | 6 x Ø8 | 6 x Ø8 | 6 x Ø10 |
P1, P2 : power with the
first (fast) and second (slow) gear
S1, S2 : recovery speed, the length of line recovered with one turn of the handle in first
gear and in second gear