self-tailing winches
self-tailing winches
SELF-TAILING WINCHES
The
new self-tailing winches with spring loaded disk adapt automatically to even
the thinnest ropes and, if overloading occurs, they release the line to avoid
excess force on the self-tailing arm.
The new base, machined by the CNC
process (produced with computer numeric control machines with no cast components),
is lighter and stronger than normal castings. Easy removal from the winch makes
maintenance a simple affair.
AISI 316 s.steel central rod and roller
bearings, bronze gears, hard black anodized drum (AL) or chrome plated bronze
drum (BR).
| MODEL | W16ST | W30ST |
| POWER P1 | 14.5 | 28.0 |
| RECOVERY S1 (mm) | 110 | 60 |
| Ø LINE (mm) | 8 / 12 | 8 / 12 |
| WEIGHT AL (kg) | 2.60 | 3.00 |
| WEIGHT BR (kg) | 3.60 | 4.30 |
| SCREWS N x Ø (mm) | 5 x Ø6 | 5 x Ø6 |
ONE REDUCED SPEED WINCHES
W16 ST - W30
ST
The two smallest models (W16 ST and W30 ST) have
a single reduced gear, giving a slow but powerful force. The handle turns
freely the other way.
| MODEL | W16.2ST | W30.2ST |
| POWER P1-P2 | 7.3 / 14.5 | 7.0 / 28.0 |
| RECOVERY S1-S2 (mm) | 220 / 110 | 235 / 60 |
| Ø LINE (mm) | 8 / 12 | 8 / 12 |
| WEIGHT AL (kg) | 2.60 | 3.00 |
| WEIGHT BR (kg) | 3.60 | 4.30 |
| SCREWS N x Ø (mm) | 5 x Ø6 | 5 x Ø6 |
TWO REDUCED SPEED WINCHES
W16.2 ST -
W30.2 ST
The addition of a direct gear to the models described
above gives a faster recovery speed, which, combined with reduced weight
and bulk, makes the two speed models the best choice for racing.
TWO REDUCED SPEED WINCHES
W40ST - W44ST
- W48ST - W52ST - W60ST - W65ST
Quick and powerful operation is obtainable with
the first reduced speed, then with increasing load, simply wind in the opposite
direction the second gear and maximum power is automatically selected.
All these models are available with electric motors or hydraulic motors.
| 2 SPEED WINCHES |
|
||
| MODEL | W40ST | W44ST | W48ST |
| POWER P1-P2 | 12.8 / 40.0 | 20.0 / 43.0 | 19.0 / 47.4 |
| RECOVERY S1-S2 (mm) | 125 / 40 | 80 / 38 | 84 / 34 |
| Ø LINE (mm) | 8 / 14 | 8 / 16 | 8 / 16 |
| WEIGHT AL (kg) | 4.70 | 6.30 | 7.00 |
| WEIGHT BR (kg) | 6.20 | 8.75 | 10.50 |
| SCREWS N x Ø (mm) | 5 x Ø8 | 6 x Ø8 | 6 x Ø8 |
| 2 SPEED WINCHES |
 |
||
| MODEL | W52ST | W60ST | W65ST |
| POWER P1-P2 | 14.9 / 51.1 | 18.7 / 61.2 | 26.2 / 65.2 |
| RECOVERY S1-S2 (mm) | 107 / 31 | 85 / 26 | 61 / 24 |
| Ø LINE (mm) | 10 / 18 | 10 / 18 | 10 / 20 |
| WEIGHT AL (kg) | 9.10 | 11.00 | 14.50 |
| WEIGHT BR (kg) | 12.40 | 14.40 | 18.90 |
| SCREWS N x Ø (mm) | 6 x Ø8 | 6 x Ø10 | 6 x Ø10 |
P1,
P2 : power with the first (fast) and second (slow) gear
S1, S2
: recovery speed, the length of line recovered with one turn of the handle
in first gear and in second gear
TWO REDUCED SPEED WINCHES
W66ST - W70ST
Large drum winches for 15-18 m boats. All the gears
are fitted with roller bearings and the drum works on a very wide diameter
roller-ball bearings.
These models are available with electric motors
or hydraulic motors.
| 2 SPEED WINCHES |
|
|
| MODEL | W66ST | W70ST |
| POWER P1-P2 | 18.0 / 65.6 | 27.1 / 69.8 |
| RECOVERY S1-S2 (mm) | 89 / 24 | 59 / 23 |
| Ø LINE (mm) | 12 / 22 | 12 / 22 |
| WEIGHT AL (kg) | 16.50 | 21.40 |
| WEIGHT BR (kg) | 22.20 | 26.70 |
| SCREWS N x Ø (mm) | 6 x Ø10 | 6 x Ø10 |